bridge strengthening anchor bolt adhesive

1.Meterial:Polyurethane,modified epoxy acrylate 2.Size:3.5kg/can,4kg/can 3.Fine water,acid,alkali,aging,heat, fire resistance

Product Name: bridge strengthening anchor bolt adhesive

Application:

Concrete iron or anchor fixing adhesive for construction joint,road widening, bridge strengthening,reservoir strengthening and renovation of old buildings,etc.

Main properties:

1.Double components adhesive;

2.Environment friendly without styrene;

3.Water resistance,free-thaw resistance,acid and alkali resistance,aging resistance,heat resistance and fire resistance;

4.Low sensitivity to humidity;

5.Fine affinity for cincrete equal to effectiveness of embedded parts.

Attention:

1.Continous operation recommended to avoid waste;

2.Do not operate in wet place;

3.Make sure the holes are clean during operating;

4.The operating temperature should be between-10°c~40°c;

5.The recommended dosage of the adhesive is 2/3 volume of the hole or fill the hole up;

6.Fill the hole from the bottom of the hole to avoid bubbles;

7.12 months valid if stord in ventilative place;

8.Clean the tools immediately with acetone after use;

9.Refer to the application direction on the package before use.

4L(4kg)plus 110g hardener	18L(20kg)/Drum plus 1L(600g)
4sets/ctn	hardener

bridge strengthening anchor bolt adhesive